650mm Automatic Carton Folder Gluer Machine

Main Machine Units and Functions

1. Automatic Feeding Unit

The feeding section uses an independently driven motor, conveying belts, and a paper-stack vibration device to support accurate and stable feeding of carton blanks.

The feeding mechanisms are adjustable to accommodate different paperboard sizes and reduce job changeover time.

2. Side Register Unit

The side register aligns carton blanks before they enter the folding process.

The system supports left-side and right-side correction according to the selected operating setup.

3. Pre-Folding Unit

The pre-folding section prepares cartons for subsequent folding and packaging operations.

The first crease line can be pre-folded to 180°, while the third crease line can be pre-folded to 135°.

The adjustable working rails allow the folding mechanism to accommodate different carton structures.

4. Gluing Unit

The gluing section applies adhesive to the required areas of the carton blank.

Left and right gluing mechanisms provide independent fine adjustment of glue application. The required adhesive equipment should be selected according to the carton material and gluing method.

5. Final Folding Unit

The extended final folding section allows carton blanks to travel through a controlled folding path.

Independently adjustable folding belts support different carton dimensions and folding arrangements.

6. Trombone Unit

The trombone section supports carton accumulation and alignment after folding and gluing.

Separately driven upper and lower transport mechanisms accommodate cartons of different lengths. The section also includes automatic kicking and counting functions in the documented machine design.

7. Compression and Delivery Unit

The delivery section applies adjustable pressure to the folded cartons during adhesive setting.

Pneumatic pressure adjustment and synchronized conveyor operation help maintain consistent carton transport through the final processing stage.

Optional Machine Configurations

Additional equipment functions can be discussed according to the required production process.

Technical Specifications

Technical Note: Specifications are based on the supplied 650-series technical data. Adhesive equipment, inspection functions, and the final machine configuration should be confirmed before ordering.

Supported Carton Types and Materials

The 800mm Automatic Folder Gluer Machine can be configured for different carton structures and processing requirements.

Supported Carton Structures

The 650mm model has documented processing ranges for six carton structures.

The suitable processing dimensions vary by carton structure. Customers should provide carton drawings, blank dimensions, and material specifications to confirm machine compatibility.

The required folding accessories and configuration for each carton type should be confirmed before ordering.

Supported Carton Materials

The 650mm Automatic Carton Folder Gluer Machine supports the following materials within its specified operating range.

Material suitability also depends on thickness, stiffness, surface treatment, blank dimensions, and box construction.

Frequently Asked Questions

What is the maximum paper width of the 650mm carton folder gluer machine?

The machine supports a maximum input paper width of 650mm. Actual carton processing dimensions depend on the box structure and folding configuration.

What types of carton board can the machine process?

The supplied specifications indicate compatibility with 157–800g/m² carton board and N and F flute corrugated board.

What is the maximum gluing speed?

The maximum specified gluing speed is 400m/min. Actual production speed depends on carton dimensions, material characteristics, and the machine configuration.

Can the machine produce four-corner and six-corner cartons?

The 650-series carton specification diagram includes four-corner and six-corner carton processing ranges. Suitable folding tooling and machine configuration must be confirmed for the required carton design.

Does the machine support pre-folding?

Yes. The documented pre-folding system supports 180° folding of the first crease line and 135° folding of the third crease line.

Can the machine use hot melt adhesive?

Hot melt adhesive is listed among the compatible adhesive types. The appropriate adhesive application equipment must be confirmed for the final configuration.

Is an inline vision inspection system available?

An inline LUSTER vision inspection system is documented for the separately quoted LG800 equipment. Its availability for the 650mm model should be confirmed with GOOD CHOICE MACHINERY.

How much installation space is required?

The specified machine dimensions are approximately 19m long, 1.2m wide, and 1.4m high. Additional space should be allowed for operation, maintenance, material handling, and safe access.

How can I select the right carton folder gluer?

Provide your carton drawings, unfolded blank dimensions, board materials, carton structures, production requirements, and preferred adhesive method. These details help determine suitable machine specifications and optional equipment.