PRODUCTS

Home » Products » Flexo Printing Machine » 8-Color Servo Sleeve Flexo Printing Machine with Camera Register and Non-Stop Unwind & Rewind

5 8-Color Servo Sleeve Flexo Printing Machine with Camera Register and Non-Stop Unwind & Rewind

8-Color Servo Sleeve Flexo Printing Machine with Camera Register and Non-Stop Unwind & Rewind

Quantity:
Availability:





Inquire Add to Basket

Technical Specification

Product Overview

Frequently Asked Questions

Technical Specification

The picture is only for reference. Actual configuration is as following

Detailed Technical Specifications

Parameter	Value	Parameter	Value
Supply Model	Wholesale / Project-Based Only	Printing Method	Flexographic Printing
Number of Colors	8	Printing Structure	Servo-Driven Sleeve Type (F3)
Max Printing Speed	Up to 200 m/min	Printing Repeat Length	350–810 mm
Registration Accuracy	±0.10 mm	Plate Thickness	1.14 mm
Plate Mounting	Sleeve Plate System	Anilox Type	Ceramic Anilox Roller
Anilox Quantity	8 Sets	Anilox LPI	Defined by Customer
Ink Supply Type	Chamber Doctor Blade / Open Ink Tray	Supported Ink	Water-Based / Solvent Ink
Supported Material	Paper	Paper Weight Range	80–350 gsm
Max Substrate Width	1020 mm	Max Printing Width	1000 mm
Unwinding Units	2 Sets	Max Unwind Diameter	1500 mm
Core Size	3-inch & 6-inch Air Shafts	Splicing Type	Automatic Non-Stop Splicing
Rewinding Type	Servo motor Drive, Non-Stop	Max Rewind Diameter	1500 mm
Min Rewind Diameter	700 mm	Rewind Tension Control	Servo Closed Loop
Web Guide Precision	±0.02 mm	Web Guide System	Photoelectric, Closed Loop
Web Cleaning	Cleaning + Anti-Static Unit	Corona Treatment	Single Corona Unit
Drying Method	Hot Air + IR	IR Control	Independent per Unit
Exhaust System	Integrated Waste Gas Exhaust	Inspection Type	Camera-Based Image Inspection
Camera Resolution	High Definition	Inspection Function	Zoom & Fixed Position
Control System	PLC + Touch Screen	Job Management	Job Save / Recall
Registration Control	Camera Auto Register + Pre-Register	Diagnostic System	Fault Record & Alarm
Remote Service	Remote Diagnosis & Program Upload	Lubrication System	Automatic Lubrication
Servo Motors	Baumueller / Lenze / Rexroth	Sensors	Leuze / Turck
Power Supply	380V / 3PH / 50Hz	Control Language	English / Chinese
Operating Temperature	15–35 °C	Operating Humidity	30–80%
Installation Altitude	Below 2000 m	Foundation Requirement	Floor ≥ 200 mm
Paper Break Detection	Automatic Stop	Low Paper Alarm	Yes
Warranty	1 Year	Installation Support	On-Site Engineer Available

Product Overview

Overview of the 8-Color Servo Sleeve Flexo Printing Machine for Wholesale Production

The 8-Color Servo Sleeve Flexo Printing Machine with Camera Register and Non-Stop Unwind & Rewind is developed by good-choice for industrial-scale paper printing.
This equipment is supplied strictly under a wholesale and project-based model.
There is no retail inventory or off-the-shelf stock.

This Flexo Printing Machine is designed for wide web paper substrates.
It supports stable, continuous roll-to-roll production.
The machine is suited for converters managing frequent job changes.

Servo-driven sleeve printing units form the core structure.
Camera-based registration improves setup accuracy.
These systems reduce manual adjustment during production.

Automation Design of the 8-Color Servo Sleeve Flexo Printing Machine

Camera Register System in the Flexo Printing Machine

A camera-based register system aligns all printing units automatically.
The first color acts as the reference for the following stations.
This reduces paper waste during setup.

The system supports pre-register before production starts.
Operators can recall saved jobs through the control system.
This improves repeat order efficiency.

Smart Control and Diagnostics

Each printing unit has an independent control panel.
The machine supports job save and recall functions.
Fault records are stored for later review.

Remote diagnostic access allows technical support from the factory.
Machine status is monitored in real time.
This helps reduce downtime during operation.

Printing Structure of the 8-Color Servo Sleeve Flexo Printing Machine

Servo Sleeve Printing Units

The machine uses an F3 sleeve printing structure.
Sleeves allow flexible printing repeat lengths.
Different outer diameters share the same inner diameter.

Each printing unit is driven by a servo motor.
This enables stepless adjustment of printing length.
The 8-Color Servo structure supports stable multi-color alignment.

Ceramic anilox rollers are installed for ink transfer.
Ink trays are open type with ink pumps.
This design supports consistent ink supply.

Non-Stop Unwind & Rewind System for Continuous Production

Non-Stop Unwind & Rewind Operation

The Non-Stop Unwind & Rewind system supports continuous production.
Two unwinding units allow roll changes without stopping the machine.
Automatic splicing keeps paper thickness consistent.

Vacuum suction and preset tape devices ensure firm splicing.
Bevel cutting reduces impact when splices enter printing units.
Paper storage devices stabilize tension during roll changes.

Tension Control and Web Handling

In-feed and out-feed tension systems are servo controlled.
Pressure glue rollers maintain stable paper feeding.
Web guide precision reaches ±0.02 mm.

Paper cleaning and anti-static units remove dust before printing.
A corona unit improves ink adhesion on paper surfaces.
These systems support stable print quality.

Drying, Inspection, and Finishing Systems

Drying System for the Flexo Printing Machine

Each printing unit includes hot air and IR drying.
Short-wave IR lamps allow adjustable temperature control.
Drying power adjusts automatically with printing speed.

Waste gas is collected and exhausted safely.
Independent temperature control supports different inks.
This helps maintain print stability.

Image Inspection and Quality Monitoring

High-definition cameras capture printed images in real time.
Operators can zoom and inspect specific areas.
Image inspection supports quality control during production.

Frequently Asked Questions

Is this flexo printing machine available for retail purchase?

No.
This product is supplied only under wholesale and project orders.

What materials does the machine support?

The machine is designed for paper substrates and Film(bopp pet cpp and etc) ： Non-stretchable film above 30 microns.

It is not intended for stretchable films.

Can the machine handle frequent job changes?

Yes.
Sleeve structure and camera register support fast changeovers.

Does the machine support continuous production?

Yes.
The Non-Stop Unwind & Rewind system allows roll changes during operation.