Automatic UV & Water-Based Oil Varnishing Machine with Air Knife

Quantity:
Availability:





Inquire Add to Basket

Technical Parameters

Detail configuration

FAQ

Technical Specifications

Parameter	SG-E1200 specification
Maximum paper width	1150 mm
Maximum paper length	1150 mm
Minimum paper size	390 × 320 mm
Paper weight	80–600 gsm
Air knife paper range	80–500 gsm
Working speed	10–80 m/min
Feeding pile height	1150 mm
Collecting pile height	1050 mm
Roller length	1250 mm
Main motor power	3.5 kW
Total power	60 kW
Infrared lamps	18 × 1.2 kW
UV lamps	3 × 8 kW
Power supply	380 V, 50 Hz, three phase
Machine weight	Approx. 6900 kg
Machine dimensions (L × W × H)	12,800 × 2000 × 1800 mm
Model	SG-E1200

Detail configuration

FEEDING UNIT
	1 High Speed Feeder, 4 suckers for lifting and 4 suckers for conveying structure. Max Speed 12000 sheets/h 2 The paper feeding table has upper and lower over-limit protection 3 Double or multi-sheet detection device 4 The paper pile table rise protection device, there is a micro switch above the paper carrier to prevent the paper from rising too high and hitting the feeder 5 Becker Vacuum Pump
CONVEYING TABLE
	1 The conveying table adopts customized stainless steel corrugated board 2 The brush wheel and rubber pressing wheel move smoothly
DUST REMOVER AND INKJET PRINTER(OPTIONA)
	Water powder remover device (optional) increase one coating unit for water powder remover, remove the dust on the surface of the paper after printing to avoid white spots after the paper is coated.
COATING HOST
	1 Three rollers reversing speed control head to ensure the water-based varnishing effect without streak printing. 2 The metering rollers are individually motor driven to ensure even gluing. 3 Improved air knife technology for thin paper (80-500g) to ensure that the paper does not attach to the roller after coating and runs smoothly. 4 Add pedal for workers to step on and use, more convenient to debug the machine, and add railing behind the pedal for more safety. 5 Upgrade the touch screen operation center console, more convenient and accurate operation.
Dryer
	1 Infrared drying with 18pcs Infrared lamp 2 Ultraviolet drying with 3pcs ultraviolet lamp 3 Fan cooling device 4 When multiple sheets enter the paper collection machine, the bridge plate automatically turns up, the machine runs normally, and the paper receiving table collects the paper. 5 if paper length more than 1650mm, drying passing way length is 8000mm. Add cost. The intelligent transformer for Ultraviolet lamp (optional), energy saving 30-40%.
AUTOMATIC COLLECTOR
	1 Adopt pneumatic paper sorting structure to ensure the neatness of the paper and facilitate the next process 2 Counting electric eye, the number of running paper is displayed on the display screen at the take-up machine, which can be cleared and accumulated 3 Induction electric eye, sensing the length of the paper, if the length of the paper changes, the belt will accelerate, and the baffle of the take-up machine will overturn and lift the paper. 4 Reduction wheel to prevent the paper from being damaged due to too fast hitting the baffle.
Others	1. UV oil bucket 2. Waterbase oil bucket 3. Air storage tank

Machine layout

Frequently Asked Questions

What paper weight can the machine process?

The stated machine range is 80–600 gsm. The air knife is specified for paper from 80–500 gsm.

Can the machine apply both UV and water-based varnish?

Yes. Both coating types are listed in the supplied machine specifications. The drying settings and coating formulation should be selected for the intended job.

Is the dust removal unit included?

The surface dust removal unit is listed as optional. It should be specified separately if printed sheets require powder removal before coating.

Planning a varnishing line? Send Good Choice Machinery your sheet size, paper weight, coating type and required output to confirm the appropriate configuration.