PRODUCTS

Home » Products » Paper Processing Machine » Automatic Vertical Laminating Machine

Automatic Vertical Laminating Machine

Quantity:
Availability:





Inquire Add to Basket

Product Description

Key Components

Technical Specifications

FAQ

Product Description

This automatic vertical laminating machine supports both water-based adhesive lamination and pre-coated thermal film lamination. It processes printed paper from 80 to 500 gsm at a specified working speed of 10–100 m/min.

Servo-controlled feeding and sheet overlap help maintain a consistent paper path. The machine then applies adhesive or thermal film, bonds the film under heat and pressure, separates the laminated sheets, and delivers them to an automatic collector.

Key specifications: 1080 mm maximum paper width · 10–100 m/min working speed · ±2 mm sheet overlap tolerance · 80–500 gsm paper range

Lamination Processes and Film Compatibility

The machine supports water-based dry lamination using waterborne polyurethane adhesive, as well as thermal lamination using pre-coated film. The supplied equipment information lists OPP and BOPP film.

The appropriate film, adhesive and operating settings should be selected according to the printed paper and required finish.

Key Components

FEEDING UNIT

1. Servo Motor Feeder, 4 suckers for lifting and 4 suckers for conveying structure. Max Speed 12000 sheets/h

2. The paper feeding table has upper and lower over-limit protection

3. The height of non-stop feeding can reach 1300mm, pre-stacking device, non-stop feeding

4. BECKER VACUUM PUMP

CONVEYING TABLE AND OVERLAP

1.The conveying table adopts stainless steel corrugated board.

2.Moverable paper pressing holder make sure the sheet delivery stable.

3.Servo motor control sheet overlap, accuracy of overlap ≤±2mm

LAMINATOR HOST

1. Drying roller diameter is 800mm, fill liquid into the roller and seal it. Electromagnetic heating control system is adopted for drying, the film is heated evenly, and the drying speed is more faster, lower energy consumption. The stainless steel fin electric heating tubes are built in the auxiliary oven.

2. 。Heating roller adopt electromagnetic heating system, heating up and cooling down fast, Built-in temperature measurement probe for accurate temperature reading.

3. The heating press roller adopts a segmented heating system(optional), efficient and energy-saving.

4.The diameter of the pressure rubber roller is 380mm, and the pressure can be up to 15T.

5.The gluing roller and the measuring roller running are controlled by the motor, and the glue is applied evenly.

Glue thickness micro adjust, easy to control by the Gauges

6. The machine stops in an emergency and the pressure film frame rises automatically, so that the film is not contaminated by glue.

The gluing system Teflon process treatment, easy to clean and non-sticky. When machine stop

CUTTING UNIT

1.The paper cutter is equipped with a tension controller, double sets anti roll structure, flat and non curly after thin paper laminating.

2.The paper cutting part include grinding wheel and disc knife for slitting, meeting customers' requirements for slitting films of different materials.

3.The bounce roller is controlled by an independent motor, and the paper can be separated by using the speed difference, assist to film break.

NON-STOP COLLECTOR

Optional non stop automatic board change.

1.The non-stop collector height can reach 1300mm. When the stack is almost full, the delivery conveyor belt will automatically extend to accept the paper. The collector platform will drop. After the tray is replaced, the platform will recycle and complete the non-stop collector.(Option)

2.Adopt pneumatic paper sorting structure to ensure the neatness of the paper.

3.With a reduction wheel to prevent the paper from being damaged due to too fast hitting the baffle.

4.Induction electric eye, sensing the length of the paper, if the length of the paper changes, the belt will accelerate, and the baffle of the take-up machine will overturn and lift the paper

5.Counting electric eye, the number of running paper is displayed on the display screen at the take-up machine, which can be cleared and accumulated.

Film lift

Spare parts

Technical Specifications

Parameter	Specification
Model	NFM-E1080
Maximum paper width	1080 mm
Maximum paper length	880 / 1250 / 1450 mm, depending on configuration
Minimum paper size	360 × 290 mm
Paper weight	80–500 gsm
Working speed	10–100 m/min
Sheet overlap tolerance	±2 mm
Common water-based film thickness	10 / 12 / 15 μm
Common adhesive application	4–10 g/m²
Common pre-coated film thickness	15–35 μm
Non-stop feeding pile height	1300 mm
Collection pile height, including pallet	1300 mm
Working air pressure	0.6 MPa
Power supply	380 V, 50 Hz, three phase
Machine weight	Approx. 8000 kg
Machine layout dimensions	8400 × 2200 × 2800 mm

The feeder has a specified maximum speed of 12,000 sheets/hour. This is the feeder’s capacity; the laminating line’s specified working speed is 10–100 m/min.

Configuration Options

Available configurations include maximum paper lengths of 880 mm, 1250 mm or 1450 mm. The supplied information also lists a segmented heating system for the pressure roller and automatic pallet change for the collector as optional functions.

FAQ

What paper sizes can the machine laminate?

The machine accepts paper up to 1080 mm wide. Maximum paper length depends on the selected configuration: 880 mm, 1250 mm or 1450 mm. The minimum paper size is 360 × 290 mm.

What paper weights can it process?

The specified paper weight range is 80–500 gsm. Paper above 100 gsm is generally easier to adjust according to the supplied machine information. Confirm the intended paper and film combination before production.

Does it support both water-based and thermal lamination?

Yes. The machine supports water-based adhesive lamination and lamination with pre-coated thermal film. The operating setup should match the selected film and adhesive.

What is the machine’s working speed?

The specified laminating speed is 10–100 m/min. The feeder’s maximum speed of 12,000 sheets/hour is a separate specification; actual output depends on sheet length and production settings.

Is non-stop sheet collection included?

The machine includes an automatic collector. Automatic pallet change for non-stop collection is optional and should be confirmed when specifying the equipment.