close
Choose Your Site
Global
Social Media
loading
| Availability: | |
|---|---|
| Quantity: | |
Introduction
1. HSC web cutting machine adopt the advanced technique from Taiwan and Germany, and combined with our more than 20 years’ experiences in producing sheet cutter machines.
2. The machine is designed as high-speed & high precision, transmitted by servo motor, tungsten steel single blade.
3. Cutting blades are imported from Germany, reduce the cutting load & noise effectively, so knife service time is lengthen. Reduce the shake when machine operates at a high-speed through balance adjustment.Germany precise bear and cutting knife assure the high cutting precision.
4. Germany accuracy bear and improved no-clearance gear with low meshing noise, have twice longer on service time compared with the conventional design.
5. 3 sets of slitting knifes, with clean cutting edge and middle slitting, no bur and dust generated, can be printed directly.
6. The speed of cutting paper have fast and slow speed sections in order to show the effect of separating counting and stack. The reduction wheels have a good affection on protecting paper surface against any scratches and do not have any faculas.
7. Electric control system with energy storage tank can save 30% electricity consumption. Under full capacity, the current is about 10A to 15 A VS 60A without energy storage tank.
8. This machine is the paper processing machine which is very popular in the paper making and printing industry and will improve the efficiency and benefit for your company to a large extent.
Frequently Asked Questions
What type of paper can the machine cut?
Cardboard paper, coated paper, kraft paper, cultural paper, writing paper, double gummed paper, gloss photo paper, gold and silver cardboard, aluminum paper, laser paper, packaging paper etc.
What is the gram weight of paper that the machine can cut?
About 150-1000GSM, lightweight paper can be stacked in several rolls for cutting.
What is the material of the crosscutting knife?
Tungsten Steel Germany Material.
What is the length of the crosscutting knife?
Double screw cutter: 1500 / 1700 / 1900
Single screw cutter: 1100/1400 / 1700 / 1900
What is the maximum web diameter the machine can handle?
1800mm（71''）Max.
What is the cutting length of the machine?
400-1650mm.
What is the cutting accuracy of the machine?
+/-0.15mm.
What is the cutting speed of the machine?
300 cuts/min. The excellent version of the machine performs exceptionally well in the slitting length range of 400-650mm, with a maximum speed increase of 73.8% compared to the standard model, which can reach the highest speed of 450 cuts/min.
What are the optional features?
(1) AUTOMATIC SPLICER
High performance automatic twin-head paper splicer with Taiwan control system, can splice paper automatically, performed by high flexibility and long service life, suitable for base paper which grams of 80g/m2-400g/m2.
(2) SLITTING & TRIMMING KNIVES AUTOMATIC CHANGE SYSTEM
APS-L series high-precision automatic positioning and slitting system matches high-precision slitting requirements. Intelligently, accurately and rapidly, the slitting and trimming knives is auto-changing by manipulator, thus greatly improving the ability and efficiency when product variety changing. According to different cutting requirements, it can work out different cutting solutions by coordinating with different knife, such as automatic type, manual type, connected type and pressure cutting type slitting knife, and electronic knife, etc.
(3) PLATFORM WEIGHING SCALE SYSTEM
Material Weighing: The weighing scale installed at the lifting platform can display the weight of the paper stack timely for recording. It uses German technology and adopts four-horizontal and four-vertical structure to avoid scale damage and measurement errors caused by the displacement of paper stacks.
Stack Height Measurement: The height of the paper stack can be measured by laser rangefinder. The laser sensor emits laser pulses, which are reflected back to the receiver by the stack, and its height can be calculated by the flight time of the laser pulse or the amplitude of the photoelectric signal.
(4) INFRARED ALIGN AUTO-ADJUSTMENT
Paper Rolls alignment: the operator only needs to input the width in the touch screen, which can realize the auto-alignment of the front and back paper rolls.
(5) COLOR CODE SENSOR
The high precision detector, supplied by SICK, a German brand, can accurately identify extremely fine color differences with the sensing distance tolerance up to ±5mm.
(6) DEDUSTING ROLLERS
The blue high-viscosity roller can effectively adsorb the dust on the paper, and then white dedust roller (driven by the cylinder) removes the dust on the blue. It's easy to tear off the viscous film on the white one.
(7) PALLET PUSHER
The lateral pallet auto-pusher is developed independently by HAOSHENG. The servo motor drives the pushrod to push pallets from cross range, thus gear up for collection.
(8) AUTO-MATERIAL FLOW
The tray chain conveyor mainly adopts 5 rows of straight chain conveyor, and uses the motor drive the material transport in ultra-low position straightly, which is a modular design and reach high degree of standardization. Hidden photo-electric switch can prevent photoelectric sensor or cardboard damage, servo motor built-in to save space, reversible operation, flexible adjustment, basically maintenance-free.
(9) INKJET CODING SYSTEM (INKJET PLATFORM)
This part is composed of dedust system, high-speed inkjet system, intelligent positioning system, energy-saving LED curing system, image detection system, data management system, high-speed waste removal system, typesetting software and printing software. Born for the packaging industry.
What is the gross pile weight of the machine?
2000kg.
What is the load-bearing capacity of the machine's slitting knife?
1000GSM.
content is empty!
